FOSTEX EXRT1

FOSTEX EXRT1

This is a remote unit for starting/stopping recording of a digital single-lens reflex camera
(hereinafter called camera). By attaching the unit to DC-R302, you can control cameras which are not controllable using the DC-R302 alone.

Features of the EX-RT1
• The unit can emit infrared light on the front of the camera and can control cameras which cannot be controlled from DC-R302 due to the camera design (supported models of camera are listed below).
• Equipped with a remote output [DSLR] terminal, you can control a camera through a wired
connection (supported models of camera are listed below, and available cables are listed in
“Separately required items” see page 4 on operation manual).
• Equipped with an external wired remote input [REMOTE] terminal, you can control a camera from an external remote controller (Panasonic DMW-RS1-compatible).
• You can attach/detach the unit to DC-R302 easily using a screwdriver.

Supported models
Recorder Fostex DC-R302
Camera Infrared light
Canon camera equipped with an infrared light receiving part, which is capable of starting/stopping recording using infrared light.

Supported DSLR cameras

Via Infrared
Canon: EOS 5Dmk3, EOS 5Dmk2, EOS 7D, EOS 6D, EOS 60D, EOS X5

Via Wired connection (NOTE# Necessary cable model/Version)
Canon: EOS 5Dmk3, EOS-1D X (ET-RT1C)
Nikon (10pin): D800, D800E, D4 (ET-RT1N)
Nikon (6 pin): D7000, D600, D610 (ET-RT1N2)
Panasonic: DMC-GH2**, DMC-GH3 (ET-RT1P)
**The connector of DMC-GH2 doubles as remote and mic input. You cannot use mic input when the EX-RT1 is connected.